Q: 

I am looking for a set of passenger floorboards to fit my 1981 Honda CB900C so my wife can ride with me.  Any suggestions?

A: 

We do not have anything model specific for your bike.  However, we recommend checking out the Footpegs/Controls section of the Metric catalog to see if there is something you can make work.

Q: 

I need black rubber oil lines for my 1996 Harley Sportster.  They are 3/8" ID and 5/8" OD. The OEM number is 63500-68 but I dont want to buy a whole 25 ft. roll.  Can you help?

A: 

We offer the black hose in 3 ft. and 5 ft. lengths as well as 25 ft. roll.

Q: 

Will the 440-909 duals fit my 2006 H-D FLSTNI if I have the factory saddlebags installed using the support bracket that is on the stock bike?

A: 

Without seeing the H-D saddlebag support bracket we can't guarantee anything. H-D designs a lot of parts these days that are only compatible with other H-D products. Either way, these pipes have support brackets that bolt down low on the frame. Hopefully this helps.

Q: 

I need a service manual for my 1986 FLHTC.  It has to show all wiring, gas tank lines, etc....

A: 

The 1984-90 FLT/FXR Service Manual is part number 902-006.

Q: 

Is there a handlebar bag, windshield bag, gas tank bag, or even fork bag that will fit a 2007 Sportster 1200L with a windshield?

A: 

There are many different options in the Luggage section of our catalog.  Nothing is really model specific. For a windshield mount bag, please see the Windshield Bags section of the catalog.  

Q: 

I own a 2004 Kawasaki VN2000.  It was a California bike and I want to install an aftermarket exhaust and intake.  I think I am going to need an oxygen sensor eliminator.  Can I get such a device from you guys and at what cost?

A: 

If you go with Power Commander for your fuel injection controller, they make an o2 sensor eliminator.  It is Dynojet part number 76423007.

Q: 

I own a 1990 Softtail and would like to purchase a Chrome Belt Guard Kit but I'm not sure which one to get.  Is it part number 603-086 or 603-085?  

A: 

If you still have the stock 1990 70-tooth pulley on your bike, you need part number 603-085.

Q: 

I have a 2007 Superglide FXD with stock bulky speedo. Looking for mini speedo to mount on 1-1/4" T-Bars. I liked the one in your catalog (5600264) but don't know about the electronic to mechanical conversion. I found an electronic one(5600281) but it doesn't have all the indicators. Any suggestions? Thanks.

A: 

You will have to machine your front hub and/or brake rotor to accept a front wheel speedo drive unit if you want to switch over to mechanical. The only way to go smaller with an analog gauge is if you sacrifice the indicator lights. If you go digital, you can maintain all those functions

Q: 

What is the difference in size between 120-90 and 130-90???

A: 

The first number represents the overall diameter and width of the tire. A 130 will be both a little wider and a little taller than a 120.

Q: 

Item #ZZ76428... .how do they adhere?

A: 

They attach with silicone adhesive.

Q: 

I own a 2005 Honda VTX1300R Cruiser. I would like to know if there is a gas tank or cap that can tell me how much fuel I have. I now have to guess or open it up to look. I know that Harleys have gas gauges and I surely would think that I could buy an aftermarket gas tank with a gauge in it for my bike.

A: 

We have not seen a cap w/gauge for any metric cruisers yet. Please keep an eye out for one in our updated catalogs, in the event someone decides to make one.

Q: 

Do you carry tires for a 1998 Suzuki Marauder VZ800?

A: 

Yes we do. Any tires you see with the following sizes will work on your bike. Your front tire is a 130/90H/16 and your rear tire is a 150/90H/15.

Q: 

Could you please tell me which whitewall tire you offer has the widest white stripe? I want to get the widest I can get for my 2001 Kawasaki Drifter 1500.

A: 

The widest whitewall we offer the Avon Gangster AM9 MT90-16 74H WWW, part number 210-019.

Q: 

I am going to order some Cruise Peg Mounts for 99-08 Honda Cruisers, part number ZZ53068. I also want Kuryakyn Retro Pegs, #ZZ53018.  But I will need some footpeg adapters, and the only ones I can find don't say if they are male mounts or not.  They just say the bike they fit.  I need to know the order number of the adapters that will fit both the Retro Pegs and the Cruise Peg Mounts.

A: 

You will need a pair of male footpeg adapters. W recommend the ones with the adjustable stop, part number ZZ53573.

Q: 

I'm looking for a complete repair kit for a clutch on a Suzuki Intruder (springs, plates and friction things...) and also a gasket for the side of engine I have to take off.  Do you carry as I would like to get from you as I am a gold club member.

A: 

We don't carry a kit but we can special order all of the components for the clutch that you need.