J&P Cycles Technical Forums

Come participate in our American V-Twin and Metric motorcycle tech forums
Welcome to J&P Cycles Technical Forums Sign in | Join | Help
in Search

Browse Forum Posts by Tags

Showing related tags and posts for the Forums application. See all tags in the site
All Tags » HELP (RSS)
  • Radii 2" Side Viper Exhaust

    I just bought and installed my new Radii 2" Side Viper Exhaust. I love them, they look and sound bad ass. However my issue is that they do not manufactur heat sheilds. I made the mistake of not researching this prior to purchase. The only suggestion I was given to look a 4 and 10" heat sheilds...
    Posted to Sportster Tech Talk (Forum) by chrisfxd on Thu, Apr 16 2009
    Filed under: HELP
  • Rear Brake Not Working ?

    I have a 06 1200C Sporty & what happened was I saw a leak on from the rear brake hose (from the reservoir to the master brake) & fixed that & it no longer leaks, after bleeding the rear brake I still have no rear brake ? The only other problem I see is the boot cover has a hole in it. I am...
    Posted to Sportster Tech Talk (Forum) by Scott Eyer on Sun, Apr 19 2009
    Filed under: Sportster, HELP

    Yet another problem just got a new master cyl for the rear & now I have oil that leaks from the top where the cap is . I have tried 2 caps & still the same problem also I did cleaner out the air cleaner no oil there so I don"t know what to try next. I know it is not leaking from the bottom...
    Posted to Sportster Tech Talk (Forum) by Scott Eyer on Mon, May 11 2009
    Filed under: Sportster, HELP
  • Converting Electronic speedometer to Machanical.

    I am wandering if there is a kit that I can buy that will allow me to mount a mechanical speedometer to my 2002 sportster 1200. would like to mount the drive on the left side of the front wheel. Need: drive gear and mount and 12 mm cable. Have the speedometer. any direction would be apreciated. Thanks...
    Posted to Sportster Tech Talk (Forum) by brandongiuffre on Mon, Jul 13 2009
    Filed under: Sportster, HELP

    I have a 2005 sportster and want to install a round or octagon oil tank with battery trey in the space where the stock oil tank, battery, fuses... go. (I saw it and it on a 05 and it looked awesome) I wanted people with any experience and or knowledge could help plz. I have a 3.5 qt. stock oil tank and...
    Posted to Sportster Tech Talk (Forum) by seanhd on Mon, Mar 29 2010
    Filed under: Sportster, sportster Problem fixed, HELP
  • 1973 XLCH Cam Cover

    Ok for the life of me I can not find a replacement cam cover for a 71-76 XLCH. I have searched the net for hours and half only come up with the cosmetic chrome cover, I need the actual cover with the bushings. The closet part I have found on this site is http://www.jpcycles.com/product/604-962 . 2 problems...
    Posted to Sportster Tech Talk (Forum) by 1973IronHead on Sat, Apr 16 2011
    Filed under: HELP
  • Exhaust Install. Need to Dyno?

    Just picked up a STOCK 2010 HD Nightster. Plenty of mods I am looking at. This bike is QUIET! Looking at installing Samson Legend Rip Saws exhaust. New the the motorcycle community. After install, will I need to take it to a shop and have it dyno tuned right away? Any and all help is appreciated.
    Posted to Sportster Tech Talk (Forum) by capafl0wne on Thu, May 10 2012
    Filed under: Sportster, HELP, Exhaust, Sportster Upgrading, Dyno
  • Régulator for ironhead 1000 1979

    I would like to know if there is any other différence than the plug on the regulato # 381-309 (1965 /1977) and the # 381-329 (1978 / 1981) Thanks Robert
    Posted to Sportster Tech Talk (Forum) by tibob on Wed, Apr 22 2009
    Filed under: HELP

    One of the light housings are loose at the piece installed from the factory, how do I tighten it? Is there a youtube video showing installation of the switch/ relay #2202? Thank You Ed
    Posted to Sportster Tech Talk (Forum) by eltabor on Mon, May 26 2014
    Filed under: HELP
  • power cone install

    When installing "power cones" in exhaust pipes, what is the correct gasket configuration ?
    Posted to Sportster Tech Talk (Forum) by sambonimbo on Fri, Mar 5 2010
    Filed under: Sportster, HELP
Page 1 of 2 (11 items) 1 2 Next >