|
Browse Forum Posts by Tags
All Tags » Harley (RSS)
-
I am building a custom softail right now and am at a point that a little info will go a long way. To start I had a custom frame built by wareagle which took 3yrs to actually get from them. I have inserted a S&S 145" Tribute with a 6-speed right side drive tranny and chain final drive to a Avon...
-
I have a 1996 Heritage FLSTN. I have the small stock saddlebags that came on all FLSTN models but I think I want something bigger and I want to add quick release to it. I think the bags I have now you can't do that because theye are not flat in the back. Anyone have any recommendations for some bags...
-
I recently upgraded to true dual Rhinhart exhaust for my 07 Road King. Have had no problems, bike runs and sounds great, problem is I went in for my 5000k service and was told that I was running too hot, running too lean, and that I need to add a fuel managemment system, they recommmended the Terry Components...
-
I have always checked the ring end gap and called it good. I am putting my '75 1200 back together (after removing the wavy washers on the rocker arms) and I noticed some carbon on on a compression ring that seemed to be slightly binding it. No chunks just a dark area. In the process of cleaning it...
-
anybody have a problem with the top tree hitting the front of the gas tank at full turn and if so, is this the reason for not for changing the model year in the new book not to fit 06-08 wideglides for the 2" and the 3" tank lifts?
-
I am looking for a reasonable priced lift for my garage to do minor work on my HD. Also the lift needs to hold the bike when I remove the front or rear tire. Any advice out there? I have a 08 Ultra Classic
-
installed rear led and the turn signals work good installed them on the front and the turn signals do not flash any ideas the led lights were just replacement for the 1157 bulbs thanks ron
-
THANK FOR ALL THE INFO. HD NEED TO DO MORE, FOR ME TO SPEN MORE THEN 20K FOR & BAGGER, &THEN 2G TO MAKE IT TO RUN RIGHT, HD NEED TO GIVE BACK SOMETHING. THANK RICH
-
Can anyone tell me why the molex crimp tool is so expensive? You know this is the tool for all the deutch electrical conections on the Harley. Has anyone found this tool for under $400.00
-
Thanks Xea I was fooled by the picture as the ones for the 97 FLSTF don't look like that. Any hel on the rear signal body itself? Regards gwanoy
|
|
|