|
Browse Forum Posts by Tags
All Tags » New member-thanks for the chance to learn and enjoy my Harley (RSS)
-
I have an 2006 Flhtpi electra glide-just bought my first Harley this Spring.Love It!!!! would like to hear the Harley sound more clearly. I have been searching the webs and talking to friends in my Bourbeuse Valley H.O.G. chapter and others at rallies. I have been considering Vance &Hines big shot...
-
I have a few questions about my ol ironhead. I don't know too much about bikes yet...but learning. I had a shop repalce the points/ condensor, set the timing and adj. the carb. I was having problems wit it running, felt alot like a mis-fire in a car. Here's the problem though, now it will only...
-
Yes, I am looking at getting a Wyatt Gatling "Druid" fork assembly front end. But it tells you they are 8" over stock and so forth. I would like to know what they consider stock length. I have found looking at different front ends that there are different stock length's, some 30"...
-
So after all this time, I cant take the clunk in my Dyna Wide Glide triple trees any longer. I have adjusted, re-adjusted, increased the torque, and just about everything else I have seen in the forums here short of taking it to my local dealer. Does J&P sell the parts and tools and parts needed...
-
i'm concidering replaceing my stock foot pegs and gear lever with as yet undecided forward controls.Obviously i need to replace the stock inspection cover,but i have'nt been able to find a seal or blanking plug to blank off the hole on the inner primary case where the old shaft exits.Can anyone...
-
Im a bit of a novice when it comes to mc mechanics. I have a 2010 road glide custom and would like to install this intake, s&s tuned induction complete kit 420-383 with a vance and hines 2 into 1. Are these compatible? What would have to be done after install? Will I need a power commander? Should...
Posted to
Harley Tech Talk
(Forum)
by
racer19
on
10-13-2009
Filed under: New member-thanks for the chance to learn and enjoy my Harley, Exhaust, air cleaner fitment
-
My Harley is a 2006 wide glide, I read about cylinder head temp that run around 300 to 325 on a hot day around 100 degrees. I added a gauge to track the cylinder temperature on both cylinders; the thermocouples are located under the spark plugs. I took it out for a ride; the outside temperature was about...
-
Do you use the Harley - Davidson Oil? I am trying to find the best oil for my 08 Ultra Glide. Also is there a highly recamended repair manual on the market?
-
I own an 05 Road King. Has anyone installed the electric shifter offered in the J&P catalog and do they like it?
-
Just replaced the oil pump and breather value. Pulled/replaced the cam and now I have to adjust the valves. Any thoughts?
Page 1 of 1 (10 items)
|
|
|