J&P Community

The frame is a #20016 Mid-USA from J&P, The "76" FX 4 speed has the stock clutch arm and the frame has the softtail "84 - 99" oil tank #740-918/ and #630-133 clutch cable bracket. The foot controls are shop built, except for the foot clutch mechanism due to no cable yet. It is...

I want to use Kuryakn Halogen Small Silver Bullet Lights (330-515 rear, 330-517 front) on a pan/shovel generator 12volt chopper I'm resurrecting. I want the rear Silver Bullets to be run-brake-turn and front to be run-turn. Would like to know what do I need to make this happen. Do I need front AND...

Can anyone tell me the difference in the travel length between a "H" and "J". according to the instructions that came with the clutch cable I just bought a "J" length travel is for a 2001-2002 FXDWG and a "H" is for a 1996 up softtail. I have broken 2 replacement...

I am building a custom softail right now and am at a point that a little info will go a long way. To start I had a custom frame built by wareagle which took 3yrs to actually get from them. I have inserted a S&S 145" Tribute with a 6-speed right side drive tranny and chain final drive to a Avon...

I have a custom build with a 66 frame, I know that it is made for a 4 speed but do they make a tranny plate to adapt a 5 or 6 speed? I understand the issues with the primary and such.

I need a clutch cable for a custom foot clutch around 27" long give or take, any ideas for a part #. It's for a 4 speed ratchet top.