J&P Cycles Technical Forums

Come participate in our American V-Twin and Metric motorcycle tech forums
Welcome to J&P Cycles Technical Forums Sign in | Join | Help
in Search

Browse Forum Posts by Tags

Showing related tags and posts for the Forums application. See all tags in the site
All Tags » ign (RSS)
  • 78 coil replacement

    I have a 78 sportster and have replaced the points and condenser with a rev tech high-performance electronic ignition system and replaced the coil with a 3 ohm coil. the Coil is a drag Specialties 2102-0060 which is a lot like the product in this catelog as 380 - 088 which is a differnt shape than the...
    Posted to Sportster Tech Talk (Forum) by Apodgorney on Thu, Apr 2 2009
    Filed under: Sportster, ign
  • 06 SPORTY 1200C-- High Performance Ing. ?

    My Bike ( O6 SPORTY 1200C Last year before H.D. changed to F.I.) is Running Well but I would like more speed (Pass those Spotster Haters ) I payed my Harley Tax & just looking what to do next? is it worth it to install a H.P. Ignition on it? I know I would move the Rev-limter up to 6000 RPM maybe...
    Posted to Sportster Tech Talk (Forum) by Scott Eyer on Fri, Jul 3 2009
    Filed under: Sportster, horsepower, ign
  • Re: 06 SPORTY 1200C-- High Performance Ing. ?

    Thanks for all the input -- I am just going to ride my Sporty like it is. A much bigger problem down the road is the state of California ( which has no money) Tried to start Smog Testing for all Bikes from 2000 to new -- Thankfully that was shot down this time but I think the time will come which will...
    Posted to Sportster Tech Talk (Forum) by Scott Eyer on Sat, Jul 11 2009
    Filed under: Sportster, ign
  • 06 1200 SPORTY CUTS OFF

    I have a problem that just started for no reason-- it Idles fine put it in 1st & at 2800 RPM it starts cutting out (like no gas) in 2nd it starts cutting out at 2500 RPM then 3rd at 2000 RPM I have changed the plugs, wires, coil & no help which leaves the ICM my bike has been sitting out (covered...
    Posted to Sportster Tech Talk (Forum) by Scott Eyer on Wed, Aug 5 2009
    Filed under: Sportster, ign
  • California Sporty 1200 06 problem Fixed

    I have a California Sporty 1200 06 the problem I was having was just as if the Rev limiter was kicking in at 2000 RPM. The fix was on the other side of the gas tank is a gas vent with a hose that went to a one way (let gas fumes out but not let air in) that $5.00 part was stuck closed which caused all...
    Posted to Sportster Tech Talk (Forum) by Scott Eyer on Sun, Aug 9 2009
    Filed under: Sportster, sportster Problem fixed, ign
  • fat bob 6 post ignition wiring

    I have a 96 sportster hugger 883 with a fat bob tank and egnition. Had to change the swithch out and now i have no lights,horn, or brake lights. i need a wiring diagram for it, the switch didnt come with one. I will appericiate any help i can get. I have been trying to fix it for over a month now.
    Posted to Sportster Tech Talk (Forum) by skott on Fri, Aug 28 2009
    Filed under: ign
  • Re: Carb setting

    OK thanks. I think I'm going to start with the carb first. Just have to make a screwdriver to fit between the tank and carb. Then adjust the valves. I did adjust them while assemblying the engine but I'll recheck them. The plugs are new but look like the engine is running rich. I have staright...
    Posted to Sportster Tech Talk (Forum) by Nightrider on Fri, Nov 19 2010
    Filed under: ign, Exhaust, Fuel system
  • Re: 06 1200 SPORTY CUTS OFF

    I did talk to J.P. Tech Support & they agreed it is the Ing. Module & that on Harleys they go bad all the time. I think I will be buying the Dyna 2000TC P/N 382-290 It just cost more & more to ride my Harley Thanks Scott
    Posted to Sportster Tech Talk (Forum) by Scott Eyer on Thu, Aug 6 2009
    Filed under: Sportster, sportster Problem fixed, ign
Page 1 of 1 (8 items)