J&P Community

ezdan Internal wiring can look extremely difficult but it is actually pretty easy if you are patient. As far as the hole size in the bars that depends on the gauge wiring that you are using and what switch housings. First you have to determine the tools you need. I use: Soldering Iron, Solder, Heat Shrink...

I run Mobile-1 15w50 wt in my '05 fat-boy. I'm about 500 miles from an oil change and I have a quart of Mobil-1 20w50 V-twin oil. Would it hurt to top it off with the 20w50. I've had it on my shelf for a couple of years and I'm tired of looking at it. And I paid 11.00 for it!

Probably a very stupid question but, which side of a coil is positive and or negative. Have a Dyna coil neither post is labled. Have checked manual but no wire schematic for 82 FXR shovelhead. I guess that year fell through the cracks because of the engine change to Evo. Very tough bike to find info...