J&P Community

Yes, I am looking at getting a Wyatt Gatling "Druid" fork assembly front end. But it tells you they are 8" over stock and so forth. I would like to know what they consider stock length. I have found looking at different front ends that there are different stock length's, some 30",27" even found one that called 21" a stock. 

 You are right, different models have different stock lengths. As these Druid fork assemblies are used the majority of the time on FXST models, the measurement is based off the stock length of 32" inches. That is measured top of the top tree to axle center.

 Thank you very much for your reply, that helps a lot. It can get confusing with these different "STOCK" lengths.